Hioki IM3533 - 4.3 Setting DC Resistance Measurement

4.2 Setting Basic Settings of Measurement Conditions
72
• Low Z high accuracy mode is only available for the 100 m and 1  ranges.
Refer to the following.
• The valid setting range for the measurement signal level varies in low Z high accuracy
mode (p. 54).
• Changing the low Z high accuracy mode setting while open compensation, short compen-
sation, or load compensation is enabled causes the compensation values to be disabled.
No. Measurement range to 1 kHz to 10 kHz to 100 kHz to 200 kHz
1 100 M
2 10 M
3 1 M
4 100 k
5 10 k
6 1 k
7 100 
8 10 
9 1 
10 100 m
Normal mode only
(setting not possible for low Z high accuracy mode).
Low Z high accuracy mode/ normal mode
None