Application settings
Measurement result judgment setting
(p. 199)
Save settings of measurement results
(p. 138)
Panel loading and saving (p. 249)
System reset (p. 147)
Waveform averaging function setting
(p. 128)
Range synchronization function setting
(p. 120)
I/O output setting of judgment results
(p. 134)
I/O trigger setting (p. 136)
HIGH-Z reject function setting (p. 130)
Number of display digits setting for each
parameter (p. 140)
LCD setting (p. 142)
Beep sound setting (p. 141)
Key-lock setting (p. 144)
EOM Output Method Setting (p. 137)
TRANSFORMER mode measurement screen is displayed.
Contact check function setting (p. 132)
To Next Page
Loading...
