Hioki PW3198 Manual

6
Display and analyze the data recorded by the PW3198 POWER QUALITY ANALYZER.
Automatically and effortlessly create rich reports for compliance and record management.
Viewer Function
Use Model 9624-50 PQA-HiVIEW PRO (version 2.00 or later) with a PC to analyze the data collected by the PW3198.
Report Creation Function
Other Functions
EN50160 is a power quality standard for the EU. In this mode, evaluate and
analyze power quality in accordance with the standard. You can display the
Overview, Harmonic, and Measurement Results Category windows.
Data recorded with the HIOKI 3196 and 3197 Power Quality Analyzers can
also be analyzed.
Report output items: Voltage/current RMS value fluctuation graph, harmonic fluctuation graph, inter-harmonics fluctuation graph, flicker graph, integral power graph, demand graph,
total harmonic voltage/current distortion rate list, EN50160 window (Overview, Harmonic, Measurement Results Category), worst case, transient waveform,
maximum/minimum value list, all event waveforms/detailed list, and setup list
Convert data in the range specified in the TIME PLOT window into CSV format and
then save for further processing. The 9624-50 can also convert event waveforms
into CSV format. Open CSV data using any commercially available spreadsheet soft-
ware for advanced data management and analysis.
Data in the SD memory card inserted in the PW3198 can be downloaded to
a PC via USB or LAN.
EN50160 Display Function
Even Analyze Data Recorded with Models 3196 and 3197 PQAs
CSV Conversion of Measurement Data
Download Measurement Data via USB/LAN
Print Examples
Analyze Recorded Data with a PC Using Application Software 9624-50 PQA-HiVIEW PRO
Delivery media CD-R
Operating environment AT-compatible PC
OS Windows10, Windows8, Windows7
Memory 512 MB or more
9624-50 Specications
Status Window
RMS Value Voltage Fluctuations
Transient Waveform Window
All Event Detailed List
Inrush Current Event Graph Window
TIME PLOT Recording of Parameters
Harmonics TIME PLOT Window
EN50160
Analyze the ITIC (CBEMA) curve (tolerance curve)
used in the power quality standards in the United
States.
Display a list of power supply failures (events) that
occurred.
Event List Window
Display the TIME PLOT (recorded trend) data as well
as changes in the voltage/current RMS values, har-
monic, and many other parameters.
TIME PLOT Window
Display the waveform of an event that occurred, plus
the vector, harmonic, DMM, and instantaneous har-
monic values.
Event Waveform Window
ITIC Curve Display Window

Hioki PW3198 Specifications

General

Brand	Hioki
Model	PW3198
Category	Measuring Instruments
Language	English