Need help?Do you have a question about the Hioki PW3337-01 and is the answer not in the manual?
General| Brand | Hioki |
|---|---|
| Model | PW3337-01 |
| Category | Measuring Instruments |
| Language | English |
Provides instructions on safe handling of the instrument and its connected cables to prevent damage or injury.
Outlines specific safety measures and considerations for inputting signals and performing measurements.
Identifies and explains the purpose of the instrument's front panel components, indicators, and displays.
Step-by-step instructions for installing the instrument and connecting its cables and power.
Details how to correctly connect measurement lines to the instrument's input terminals.
Explains the procedure for powering on the instrument and the initial self-test process.
Describes the process of zero-adjustment to ensure measurement accuracy.
Outlines essential checks of peripheral devices and the instrument before measurement.
Guides on how to configure various instrument settings for optimal measurement.
Explains how to select the appropriate wiring mode based on the measurement circuit.
Details how to select between direct input and external current sensor input methods.
Describes how to choose display parameters, channels, and rectifiers for the measurement screen.
Explains how to manually select voltage and current measurement ranges.
Describes how to enable auto-range to automatically switch measurement ranges based on input.
Guides on setting the synchronization source for calculations based on cycle events.
Explains how to set the zero-cross filter and frequency measurement range for accurate synchronization.
Describes how to set VT and CT ratios for measuring primary-side values with external sensors.
Covers the instrument's integration function for current and active power measurements.
Steps to start the integration process and activate the RUN lamp.
Procedure to stop integration and reset all integrated values.
How to set a specific integration time for timed measurements.
Explains how to view and analyze harmonic measurement results.
Details how the instrument calculates and displays efficiency (η) for various wiring modes.
Explains how to connect and synchronize multiple instruments for simultaneous measurements.
Step-by-step guide for physically connecting two instruments using a synchronization cable.
Describes how to set the master/slave roles and control I/O settings for synchronized measurements.
Covers how to use external control signals to manage instrument functions.
Explains how to utilize the D/A output terminals for analog and waveform data output.
Describes analog output, converting measurements to signal levels for recording.
Explains waveform output, sampling and outputting instantaneous voltage, current, and power.
Explains how to select output parameters and their corresponding voltage levels.
Guides on connecting and using external current sensors for measuring currents beyond the instrument's range.
Explains how to synchronize multiple instruments for simultaneous measurements.
Provides wiring diagrams for connecting the instrument to various measurement circuits.
Offers solutions for common problems and symptoms encountered with the instrument.
Explains various error displays, their causes, and suggested remedies.
To Next Page
