Hioki PW3337-01 - Setting the Lans Default Gateway

4.2 LAN Settings and Connection (Before Using Command Communications)
125
Setting the LAN’s default gateway
Before using the LAN, set the LAN’s default gateway.
1 Press .
2 Press to display the settings
screen shown to the left.
3 Press or to move among the
address’s four numbers.
4 Press or to set the default
gateway.
Setting range: 000 to 255
5 Press to exit the settings.
6 The screen shown to the left will be dis-
played while the LAN is initialized.
The instrument will return to the normal measure-
ment state.