Hioki PW3337-01 - 2 Displaying Peak, Minimum, and Maxi; Displaying Maximum Values; Returning to the Instantaneous Value Display; Clearing Maximum and Minimum Values

3.10 Other Functions
109
The instrument continuously measures instantaneous, maximum, and minimum values. The display can be
switched to these values with the key.
• You can measure waveform peak values, for example device rush current (peak value hold).
• You can measure minimum values for measurement parameters (minimum value hold).
• You can measure maximum values for measurement parameters (maximum value hold).
Displaying maximum values
Displaying minimum values
Returning to the instantaneous value display
Press while displaying minimum values (while the MIN lamp is lit up) to return to the instantaneous
value display.
Clearing maximum and minimum values
Pressing and (DATA RESET) will clear the maximum and minimum values and restart their
measurement. Maximum and minimum values are also cleared, and their measurement restarted, at the start
of integration.
3.10.2Displaying Peak, Minimum, and Maximum
Values (Maximum Value Hold)
1 Press to place the instrument
in the shift state and then press
.
2 The MAX lamp will turn on, and the
display will switch to the maximum
value display.
1 Press while the instrument is
displaying maximum values.
2 The MIN lamp will turn on, the dis-
play will switch to the minimum
value display.