1 Introduction
1.0 Receiving Instructions
When received, any possible transport damage should be noted. A written record should be made of any
damage. A suitable remark should be recorded on the delivery documents.
A claim for damage must be reported immediately to the transport company and to the Customer Support
Department of HIPOTRONICS or the local agent. It is essential to retain the damaged packing material until
the claim has been settled.
Check the contents of the shipment for completeness immediately after receipt (See chapter “Scope of
Supply”). If the shipment is incomplete or damaged, then this must be reported immediately to the transport
company and the Customer Support Department of HIPOTRONICS or the local agent. Repair or replacement
of the instrument can then be organised immediately.
1.1 General
The 880PL-HD is a modern solution for testing the insulation strength of electrical apparatus for duty cycles
up to 60 minutes. Outfitted with a state-of-the-art digital interface, and extensive safety features, this
robust unit ensures simplistic operation, accurate results, and operator safety under all circumstances. It
features the most accurate kilovoltmeter readings regardless of load current.
1.2 Scope of Supply
1.2.1 Standard Scope of Supply
The following items are supplied with the standard instrument:
To Next Page
Loading...
