Installation GRS1020/1120/1030/1130
Release
03
01/2017
39
2.5 Mounting a media module (optional)
Hirschmann supplies the media modules in a ready-to-operate state. By
using a media module, you obtain up to 8 additional Fast Ethernet ports. You
have the option of mounting the media modules while the device is operating.
Figure 7: Mounting a media module
Proceed as follows:
Remove the cover panel from the media module slot on the basic device.
Open the lock of the media module by pressing the locking lever outwards
(step 1).
Insert the media module straight into the media module slot (step 2).
Close the lock of the media module by pressing the locking lever inwards
(step 3).
Fasten the media module with the screws in the front panel of the basic
device.
To Next Page
Loading...
