Operator’s Manual
14
Time Setting
Before setting time, the first step is to input the password. If the display shows the wrong time,
please connect with the manufacture first. DO NOT set time yourself.
The setting steps are as followed:
At first, select “Time Set” icon by rotating button at the “Function Display”, press the button or
confirmation key to enter into “Input Password” as the following:
Back to the previous display.
Confirm the select value.
Back to the main display.
At the “Input Password”, the first password “ * ” is showed automatically number “0”. Operator can
select the correct number by rotate button, then press it or confirmation key, the system will transfer to the
second “ * ”.
After inputting four numbers, press the button or confirmation key to enter into “Time Set Display”
as the following:
Back to the previous display.
Confirm the select value.
Back to the main display.
In “Time setting”, when the year number turns blue, select actual year number by rotating button and
press it or confirmation key, the next number will automatically become blue.
After setting all numbers, “Confirm?” will appear on the interface. Press button or confirmation key,
and the “current time” will be modified to the actual time.
To Next Page
Loading...