15
5.2.2 CANbus Status Overview
At the “Function Display”, select “Can Bus” icon by rotary button, press it or confirmation key to
enter into ”CANbus Status Overview Display” as followed:
Back to the previous display.
Confirm the select value.
Back to the main display.
At this display:
If the pane shows green, it means working normally.
If the pane shows yellow, it means preparing.
If the pane shows red, it means error or not-in-use status. At this moment, operators need to check
the system.
5.2.3 I/O Port Inquiry
At the main display, select “port inquiry” icon by rotate button, press the button or confirmation key
to enter into “I/O Port Inquiry Display” as followed:
Back to the previous display.
transfer to Analog Input Port Display
Back to the main display.
This display shows the information of Digital I/O port.The state pane shows green, it means high
level, DIN stands for digital input and DOUT is digital output.
If operators want to inquire analog information, please press menu key which represents icon
and transfer to “Analog Value” as followed:
To Next Page
Loading...