Operator’s Manual
16
Back to the previous display.
Back to the main display.
5.2.4 Load Inquriy
At the “Function Display”, select “Load Chart” icon by rotary button, press it or confirmation button
to enter into the “OM select” display:
Back to the previous display.
Confirm the select value.
Back to the main display.
Select the OM by rotary button, press the confirmation button to enter into the”load chart” display,
as the followed:
Select the BM length by the rotary button, press the confirmation button ,then transfer to the
corresponding load data.
Note: All values in the chart are only for example.
To Next Page
Loading...