Hirschmann HC3901 User Manual

21
Error
Code
Error Cause Elimination
E12
Fallen below lower
limit value in
measuring channel
"force main
boom(MB) right"
 Cable between the central unit
and the force transducer
defective or loose. Water
inside the plug of the
transducer
 Force transducer defective
 Electronic component in the
measuring channel is
defective.
 Check cable as well as plugs,
replace, if need be
 Replace force transducer
 Replace sensor unit
E13
Fallen below lower
limit value in
measuring channel
"force jib right"
 Cable between the central unit
and the force transducer
defective or loose. Water
inside the plug of the
transducer
 Force transducer defective
 Electronic component in the
measuring channel is defective

Check cable as well as plugs,
replace, if need be
 Replace force transducer
 Replace sensor unit
E14
Fallen below lower
limit value in
measuring channel
"force main boom
left"
 Cable between the central unit
and the force transducer
defective or loose. Water
inside the plug of the
transducer
 Force transducer defective
 Electronic component in the
measuring channel is
defective.

Check cable as well as plugs,
replace, if need be
 Replace force transducer
 Replace sensor unit
E15
Fallen below lower
limit value in
measuring channel
"angle main boom
foot"
 Cable between the central unit
and the angle sensor defective
or loose. Water inside the plug
of the angle sensor
 Angle potentiometer defective
 Electronic component in the
measuring channel defective.

Check cable as well as plugs,
replace, if need be.
 Replace angle sensor
 Replace sensor unit
E16
Fallen below lower
limit value in
measuring channel
"angle luffing jib
foot"
 refer to E15

refer to E15
E17
Fallen below lower
limit value in
measuring channel
"force luffing jib left"
 refer to E14

refer to E14

Hirschmann HC3901 Specifications

General

Brand	Hirschmann
Model	HC3901
Category	Measuring Instruments
Language	English