16
Installation MACH 1000
Release
04
12/2015
1 Description
1.1 General device description
The MACH 1000 devices are designed for the special requirements of
industrial automation. They meet the relevant industry standards, provide
very high operational reliability, even under extreme conditions, and also
long-term reliability and flexibility.
The devices allow you to set up switched industrial Ethernet networks that
conform to the IEEE 802.3 standard.
You can choose from between a wide range of variants. You have the option
to set up your device individually based on different criteria:
Number of ports
Transmission speed
Types of connectors
Temperature range
Supply voltage range
Certifications
The devices work without a fan.
If required, the devices are PoE-capable.
For devices without PoE, the voltage supply can be redundant if required.
The following installation options are available:
19" switch cabinet
Mounting on a flat surface
You have the option of choosing various media to connect to the terminal
devices and other network components:
twisted pair cable
multimode F/O
singlemode F/O
The ring redundancy concept allows the network to be reconfigured quickly
after a failure.
Product configuration data can be provided by:
diagnosis displays
displaying the operating parameters
There are convenient options for managing the device. Administer your
devices via:
a Web browser
Telnet
HiDiscovery (Software for putting the device into operation)
To Next Page
Loading...
Need help?
General
