Installation MACH 1000
Release
04
12/2015
65
Fast Ethernet SFP transceiver Order number
M-FAST SFP-TX/RJ45 942 098-001
M-FAST SFP-TX/RJ45 EEC 942 098-002
The following operating conditions apply to twisted pair transceivers:
Usable with:
- HiOS as of software version 03.0.00
- for PRP ports on RSP devices, as of software version 02.0.01
- for PRP ports on EES devices, as of software version 02.0.02
- Classic switch software as of software version 08.0.00
- HiSecOS ab Software-Version 01.2.00
Longer RSTP switching times and link loss detection times compared to twisted pair ports
provided by the device directly.
Not applicable for combo ports.
Not applicable for ports which support only Gigabit Ethernet.
To set autocrossing manually is currently not possible.
M-FAST SFP-MM/LC 943 865-001
M-FAST SFP-MM/LC EEC 943 945-001
M-FAST SFP-SM/LC 943 866-001
M-FAST SFP-SM/LC EEC 943 946-001
M-FAST SFP-SM+/LC 943 867-001
M-FAST SFP-SM+/LC EEC 943 947-001
M-FAST SFP-LH/LC 943 868-001
M-FAST SFP-LH/LC EEC 943 948-001
Other accessories Order number
AutoConfiguration Adapter ACA 21-USB (EEC) 943 271-003
Terminal cable 943 301-001
3-pin High Voltage Interlock terminal block (50 pcs.) 943 845-008
3-pin Low Voltage Interlock terminal block (50 pcs.) 943 845-011
3-pin Low Voltage Interlock terminal block (50 pcs.) 943 845-011
Bracket for fastening the housing 943 943-001
Dust protection cap (50 pieces) for RJ 45 sockets 943 936-001
Dust protection cap (25 pieces) for SFP slot 943 942-001
Network management software Industrial HiVision 943 156-xxx
To Next Page
Loading...
Need help?
General
