Opening the Web-based Interface
RM Web L2B
Release
5.3
05/2012
13
Figure 2: Login window
Select the desired language.
In the drop-down menu "Login", you select
– user, to have read access, or
– admin, to have read and write access
to the device.
The password “public”, with which you have read access for the login
"user", is preset in the password field. If you wish to have write access to
the device, use the login "admin", select the contents of the password field
and overwrite it with the password “private” (default setting).
Click on OK.
The user interface (Web-based Interface) of the device appears on the
screen.
Note: The changes you make in the dialogs will be copied to the volatile
memory of the device (RAM) when you click “Set”. Click “Reload” to update
the display.