Time
54
3.1
SNTP configuration
RM Web L2B
Release
5.3
05/2012
Parameter Meaning Possible
Values
Default
Setting
Server status Switches the SNTP server On/Off. On, Off On
Anycast destination
address
IP address, to which the SNTP server of the
device sends the SNTP packets (see
table 7).
Valid IPv4
address
0.0.0.0
Anycast send interval Time interval at which the device sends
SNTP packets.
1 - 3.600 120
Disable server at local
time source
Enables/disables the SNTP server function if
the status of the time source is local (see
Time Dialog).
On, Off Off
Table 6: SNTP Server Configuration
IP destination
address
Send SNTP packets
periodically to
0.0.0.0 Nobody
Unicast Unicast
224.0.1.1 Multicast
255.255.255.255 Broadcast
Table 7: Periodic sending of SNTP packets
To Next Page
Loading...
Need help?
General
