Hisense 32A4K - Page 5

3
Attach the wall mount bracket (not included)
CAUTION:
• Follow instructions provided with the wall mount bracket. If it is not correctly mounted,
the TV may fall and cause property damage or personal injury.
• Whenyouattachthemount,besuretousespacers(providedbythethird-party
manufacturer)betweentheTVandthebracket.
• To prevent internal damage to the TV and to ensure it is mounted securely, be sure
tousefixingscrews(notincluded)thatare8.0-10.0mminlengthwhenmeasured
from the attaching surface of the rear cover.
• We do not recommend hanging the TV on a slanted wall, and
TV
screen
Vertical
surface
when wall mounting make sure your television remains
parallel to the wall and does not lean forward.
NOTE:
• If installed on a ceiling or slanted wall, or the television installed is not parallel to the
wall, the television may fall and result in property damage or severe personal injury.
• If you have additional questions, please contact the wall mount manufacturer or the
retailer from which you purchased the TV.
• The diameter and length of the screws differ depending on the wall mount bracket model.
Before you begin the third-party
manufacturer instructions, be sure to do
the following things:
1. Place the TV face down on a clean,
safe and cushioned surface.
2. Remove the TV stand if you have
already attached it.
3.Placespacers(notincluded)inthe
corresponding bracket holes.
Screw
(not included)
Bracket
(not included)
Spacer
(not included)
8.0 - 10.0 mm
Wall mount bracket
Screw
Spacer
Rear cover of the TV
Wall mount hole
pattern(mm)
100×200(32”)(81.2cm)
200×200(40”/43”)(101.6cm/109.2cm)
Wall mount
screw size
M6