Hisense APC09 - Local Air Conditioner Operation; Operating Conditions and Modes

LOCAL AIR CONDITIONER USE
Operating your air conditioner properly helps you to local
obtain the best possible results.
This section explains proper air conditioner operation.
IMPORTANT:
NOTE: In the event of a power failure, your air conditioner will
operate at the previous settings when the power is restored.
The air conditioner display shows the setting temperature.
When changing modes while the air conditioner is
operation, the compressor will stop for 3 to 5 minutes before
■
■ Only in standby mode the display shows ambient
■
temperature
If a button is pressed during this time, the compressor will
not restart fo another 3 to 5 minutes.
In Cooling or Dry mode, the compressor and condenser fan
will stop when the room temperature reaches the set
temperature.
■
■
Operating condition
HEATING
COOLING
DRY
o o
The best room temperature for the appliance work is 7 C~20 C
o
The best room temperature for the appliance work is 21
o
C~35 C
o o
The best room temperature for the appliance work is 19 C~35 C
The temperature of some products is allowed beyond the range. In specific situation, please consult the merchant.
If the air conditioner runs in COOLING or DRY mode withdoor or window opened for a long time when relative
humidity is above 80%,dew may drip down from the outlet.
19