Hisense APH12 User Manual

15
Location Requirements
Electrical Requirements
■ The air conditioner should be connected to a 220-
240V, 50 HZ, 20-amp fuse grounded 3 prong outlet.
■ The use of a time-delay fuse or time-delay circuit breaker is
recommended.
■ All wiring must comply with local and the national electrical
codes and be installed by a qualified electrician. If you have
any questions, contact a qualified electrician.
portable
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
WARNING
fire, or electrical shock.
NOTES:
■ The flexible exhaust hose allows placement of the air
conditioner between 60 cm and 170 cm from window or door.
For appliances with supplementary heaters, the minimum
clearance from the appliances to combustible surfaces is 100cm.
■ Portable air conditioners are designed as supplemental
cooling to local areas within a room.
NOTES:
■ To ensure proper ventilation, keep the required distance from
the return air outlet to the wall or other obstacles at least 60
cm.
■ Do not block the air outlet.
■ Provide easy access to the grounded 3 prong outlet.
Vertical Slide Widow
Horizontal Slide Window
60 cm - 170 cm
60 cm - 170 cm
100 cm
100 cm
Unpack the Air Conditioner
Remove packaging materials
■ Remove and dispose of/recycle packaging materials.
Remove tape and glue residue from surfaces before turning
on the air conditioner. Rub a small amount of liquid dish soap
over the adhesive with your fingers. Wipe with warm water
and dry.
■ Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your air conditioner.
■ Handle the air conditioner gently.
WARNING
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or other injury.
■
INSTALLATION INSTRUCTIONS
combustible surfaces
combustible surfaces

Hisense APH12 Specifications

General

Type	Split system
Multi-split	No
Timer type	Digital
Noise level	64 dB
Number of speeds	3
Remotely operated	Yes
Airflow (high speed)	380 m³/h
Refrigerating medium	R290
Cooling capacity (max)	- BTU/h
Dehumidifying capacity	1.3 l/h
Timer duration (maximum)	24 h
Air conditioner functions	Cooling, Dehumidifying, Fan, Heating
Refrigerating medium weight	300 g
Suitable for room area up to	36 m²
Cooling capacity in watts (max)	- W
Cooling capacity in watts (nominal)	3500 W
Heating capacity in watts (nominal)	3000 W
Cooling energy efficiency (EER, W/W)	2.6
Heating energy efficiency (COP, W/W)	2.8
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Energy efficiency class (cooling)	A
Energy efficiency class (heating)	A+
Hourly energy consumption (cooling)	- kWh
Display type	LED
Product color	White

Weight and Dimensions

Depth	382 mm
Width	442 mm
Height	750 mm
Weight	35000 g
Package weight	39500 g