Hisense APH12 User Manual

turning off air conditioner before
trying to restart the air conditioner.
27
TROUBLESHOOTING
Before calling for service, try the sugge
stions below to see whether you can so
lve your problem without outside help.
Air conditioner will not operate
■
The power supply cord is unplugged.
Plug into a grounded
3 prong outlet. See " electrical
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
WARNING
Requirements.”
■ Time-delay fuse or circuit breaker of the wrong
capacity is being used.
Replace with a time-delay fuse or circuit breaker of the
correct capacity. See " electrical
Requirements”.
■ A household fuse has blown, or a circuit breaker has
tripped.
Replace the fuse, or reset the circuit breaker. See
“Electrical Requirements”.
■ The On/Off button has not been pressed.
Press ON/OFF.
■ The power has failed.local
Wait for power to be restored.
Air conditioner blows fuses or trips circuit breakers
■ Too many appliances are being used on the same circuit.
Unplug or relocate appliances that share the same circuit.
■ You are trying to restart the air conditioner too soon after
turning off air conditioner.
Wait at least 3 minutes after
Air conditioner runs for a short time only, but room is not
cool
■ Set temperature is close to room temperature.
Lower set temperature. See " P Air Conditioner Use ”.ortable
■ The air conditioner is in a heavily occupied room, or heat-
producing appliances are in use in the room.
Use exhaust vent fans while cooking or bathing and try not
to use heat-producing appliances during the hottest part of
the day. air conditioners are designed as
supplemental cooling to local areas within a room. A higher
capacity air conditioner may be required, depending on the
size of the room being cooled.
Portable
■ The current air conditioner replaced an older model.
The use of more efficient components may cause the air
conditioner to run longer than an older model, but the total
energy consumption will be less. Newer air conditioners do
not emit the “ blast” of cold air you may be accustomed to
from older units, but this is not an indication of lesser cooling
capacity or efficiency. Refer to the efficiency rating (EER) and
capacity rating (in Btu/h) marked on the air conditioner.
Air conditioner seems to run too much
■ Is there a door or window open?
Keep doors and windows
closed.
■ You have changed modes.
Wait at least 3 minutes after turning off air conditioner
before trying to restart the air conditioner.
Display error code
■ if the unit display error code E5, it is water full in the unit,
if the unit display error code E1/E2/E3//E6/E7/EA, please contact
you should drain the water, see “Draining the air
conditioner”. After draining, you can operate the unit again.
■
customer service.

Hisense APH12 Specifications

General

Type	Split system
Multi-split	No
Timer type	Digital
Noise level	64 dB
Number of speeds	3
Remotely operated	Yes
Airflow (high speed)	380 m³/h
Refrigerating medium	R290
Cooling capacity (max)	- BTU/h
Dehumidifying capacity	1.3 l/h
Timer duration (maximum)	24 h
Air conditioner functions	Cooling, Dehumidifying, Fan, Heating
Refrigerating medium weight	300 g
Suitable for room area up to	36 m²
Cooling capacity in watts (max)	- W
Cooling capacity in watts (nominal)	3500 W
Heating capacity in watts (nominal)	3000 W
Cooling energy efficiency (EER, W/W)	2.6
Heating energy efficiency (COP, W/W)	2.8
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Energy efficiency class (cooling)	A
Energy efficiency class (heating)	A+
Hourly energy consumption (cooling)	- kWh
Display type	LED
Product color	White

Weight and Dimensions

Depth	382 mm
Width	442 mm
Height	750 mm
Weight	35000 g
Package weight	39500 g