EasyManuals Logo

Hisense APH12 User Manual

Hisense APH12
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
25
The TIMER indicator on the appliance lights up.
3. When your desired time displayed on LCD, press the TIMER ON
button to confirm it.
A “Beep” can be heard,
“ON” stops flashing.
TIMER ON/OFF
It is convenient to set the timer on with TIMER ON/OFF buttons
before you leave so that you will come back to the comfortable
room temperature you set.
TIMER ON button can be used to turn on the unit automatically at
the time you set.
To TIMER ON
1. Press TIMER ON, Then "On 12:00" flashes on the LCD.
2. Press the UP or DOWN button to get your desired time
to turn on the appliance.
Press the UP or DOWN button once to increase or
decrease the time setting by 1minute.
Press and hold the UP or DOWN button for 2
seconds to increase or decrease the time setting by 10 minutes.
Press and hold the UP or DOWN button for a longer time
to increase or decrease the time setting by 1 hour.
TIMER ON
Increase
Decrease
ON
It is real timer control. you should set the CLOCK first.
NOTE:
Normal Sounds
When your air conditioner is operating normally, you may hear
sounds such as:
Air movement from the fan.
Clicks from the thermostat cycle.
Vibrations or noise due to poor wall or window construction.
A high-pitched hum or pulsating noise caused by the modern
high-efficiency compressor cycling on and off.
the desired time.
4. After your desired time displayed for 5 seconds, the clock
will be displayed on the LCD of remote controller instead of
SWING
Press SWING once to change vertical airflow direction. Press
again to stop airflow louver at desired airflow direction.
NOTE:
Airflow is automatically adjusted to a certain angle in accordance
with the operation mode after turning on the unit.
The direction of airflow can be also adjusted to your own
requirement by pressing the SWING button.
Do not turn the vertical adjustment louvers manually,
otherwise malfunctions may occur. if that happens, turn
off the unit first and cut off the power supply, then
restore power supply again.
SWING
To cancel Timer On
Press TIMER ON button again, a "beep" can be heard and the
indicator disappears, the TIMER ON mode has been canceled.
It is similar to set TIMER OFF, you can make
the appliance unit switch off automatically at the
time you set.
TIMER OFF
NOTE:
3. Press CLOCK button again the real time is set.
2. Using the Up and Down buttons to get the correct time.
Clock function
1. You can or adjust the real time by pressing CLOCK button
CLOCK

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hisense APH12 and is the answer not in the manual?

Hisense APH12 Specifications

General IconGeneral
TypeSplit system
Multi-splitNo
Timer typeDigital
Noise level64 dB
Number of speeds3
Remotely operatedYes
Airflow (high speed)380 m³/h
Refrigerating mediumR290
Cooling capacity (max)- BTU/h
Dehumidifying capacity1.3 l/h
Timer duration (maximum)24 h
Air conditioner functionsCooling, Dehumidifying, Fan, Heating
Refrigerating medium weight300 g
Suitable for room area up to36 m²
Cooling capacity in watts (max)- W
Cooling capacity in watts (nominal)3500 W
Heating capacity in watts (nominal)3000 W
Cooling energy efficiency (EER, W/W)2.6
Heating energy efficiency (COP, W/W)2.8
AC input voltage220 - 240 V
AC input frequency50 Hz
Energy efficiency class (cooling)A
Energy efficiency class (heating)A+
Hourly energy consumption (cooling)- kWh
Display typeLED
Product colorWhite
Weight and Dimensions IconWeight and Dimensions
Depth382 mm
Width442 mm
Height750 mm
Weight35000 g
Package weight39500 g

Related product manuals