3
Important Safety Information
SAFETY WARNINGS
Do not look directly at the lens when this device is on!
• This product comes with a laser module. Do not tear or modify this device in
any manner; otherwise, it may result in personal injury.
RG1 IEC 62471-5: 2015
CLASS 1 LASER PRODUCT IEC 60825-1: 2014
As with any bright light source, DO NOT STARE INTO THE BEAM
λ=458~472nm/519~531nm/635~651nm
Wavelength458~472nm/519~531nm/635~651nm
Caution—use of controls or adjustments or performance of procedures other than those
speciedhereinmayresultinhazardousradiationexposure.
The Device Complies with 21 CFR 1040.10 and 1040.11 except for confromance as a Risk
Group[0,1or 2-Selectappropriate RG]LIPasdenedinIEC62471-5:Ed.1.0.Formore
informationseeLaserNoticeNo.57,datedMay8,2019.
• If this device requires a repair, please wear laser eye protection with an
optical density OD that is 4 or higher and has a wave length of 458-651 nm.
• Do not place any water-containing vessel on this device, such as cosmetics
or liquid medicine.
• If any object or water enters this device, please unplug this device and
contacttheservicestaofHisense.
• Donotplace anyexposedresource(e.g. burningcandle)onthisdevice.
Keep away from high temperature and heat.
• Do not expose the battery to direct sunlight or candle light.
• Keep air vents on both sides clear from any objects to prevent the device
from overheating inside.
• To avoid a short circuit, product damage or electric shock, do not use any
sharp object or metal to touch the ports or other openings on the device.
• If this device has been in a warm environment, allow any built-up
condensationtoevaporaterstBEFOREyouswitchthedeviceon.
• Do not allow a child to stand on or climb up this device.
• Do NOT place any object above or in front of the lens because the laser light
couldcausetheobjecttobecomeammable.
• Clean the lens periodically with a clean cloth and make sure the device is
turnedobeforeyoustart.