8
Automatic Focus
2
Automatic Correction
3
When the automatic focus function is enabled, the device can automatically
adjust the focus to make your projector picture clear.
• Enable automatic focus function by pressing the button on the remote.
• You can enable manual focus function by pressing and holding the the
button, and manually adjust the focus by pressing the D-pad on the remote.
Press Home button on your remote, and select
Settings
>
Projector
>
Auto Correction
.
The device can perform automatic keystone correction on the projected
screen and automatically changes the screen shape into a rectangle.
More Settings
4
Press Home button on your remote, select
Settings
to enter the Settings
Menu to set up your device.
NOTE:
• For detailed instructions, please refer to the E-Manual.
• Parts of the software function changes with the system upgrade.
150" 120" 100" 90" 80" 70" 65"
mm
3985 3188 2657 2391 2125 1860 1727
inch
157 126 105 94 84 73 68
Screen
Size
Projection
Distance
150"
120"
100"
90"
80"
70"
65"
Image Size and Projection Distance
5