Care and maintenance
Replace the glass cover. Reconnect the appliance to the mains power supply.
Remove the glass cover of the lamp-holder by rotating
anti-clockwise.
Remove the lamp and replace with a lamp resistant to
high temperatures (300°C) with the following
characteristics:
Disconnect the oven from the power supply at the fuse-box by means of
the switch used to connect the appliance to the electrical mains ;or unplug
the appliance.
Voltage: 220-240V
Wattage: 25W
Type: G9
Induction Glass:
The Induction glass should be regularly cleaned, always wipe clean
immediately after each use once the residual heat warnings have switched off
- DO NOT clean when hob is still hot. Smudges from pans with an aluminum
bottom can be easily cleaned off with a cloth dampened in vinegar. Remove
any burnt residues immediately after cooking, rinse with water and wipe dry
with a clean cloth. Never use abrasive or corrosive detergents, cleaning
powders, oven sprays, spot-removers, steel wool or scourers.
Replacing the oven lamps
37
To Next Page
Loading...