SAFETY INFORMATION
IMPORTANT
Please read these instructions fully before installing or operating.
INSTALLATION WARNINGS
IMPORTANT: Prior to Installation ensure that the local supply conditions
(electricity voltage and frequency) are compatible with the requirements of your
freestanding cooker.
IMPORTANT: Carefully unpack and examine the appliance for any damage. If
you think there is a defect, do not use the appliance and contact product support.
Packaging materials should be collected together and disposed of immediately as
they maybe harmful to children.
IMPORTANT: Keep the electrical cable (not supplied) of your freestanding cooker
away from the hot areas of your appliance, do not let the cable touch the
app
liance. Keep the cable away from sharp edges and heated surfaces.
IMPORTANT: Ensure that the electric supply cable is not trapped or damaged
during installation.
IMPORTANT: In the event that the cable connecting your freestanding cooker
becomes damaged, it must be replaced by a suitably qualified person. This cable
must not be replaced by an unauthorised person.
IMPORTANT: Protect your freestanding cooker against atmospheric effects. Do
not expose your cooker to effects such as sun, rain, snow etc.
IMPORTANT: The materials surrounding the appliance (cabinets) must be able to
withstand a minimum t
emperature of 100°C.
IMPORTANT: When using your oven for the first time your cooker may give off
an smoke or an unusual odour from the heating elements and insulation
materials. To eliminate this odour run the oven at 250 degrees for 40-60 minutes
with the oven empty.
WARNING: Before obtaining access to terminals, all supply circuits must be
disconnected.
IMPORTANT: Make sure the oven control knobs are all in the off position when
not in use.
IMPORTANT: If you do not intend to use your built in oven for a long period of
time then turn off the electric supply t
o the oven.
3
To Next Page
Loading...