Make sure that the base of your pan is smooth, sits flat against the glass, and is the same
size as the cooking zone. Always centre your pan on the cooking zone.
Always lift pans off the ceramic hob – do not slide, or they may scratch the glass.
USING YOUR CERAMIC HOB
To start cooking
•After power on, the buzzer beeps once, all the indicators light up for 1 second then go
out, indicating that the ceramic hob has entered the state of standby mode.
1.Touch the ON/OFF control. all the indicators
show “-“
2.Place a suitable pan on the cooking zone that
you wish to use.
•Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
3.Select a heat setting by touching the “-“ or “+” control.
•If you don’t choose a heat setting within 1
minute, the Induction hob will automatically switch off.
You will need to start again at step 1.
•You can modify the heat setting at any time during cooking.
6
To Next Page
Loading...
Need help?
General
