What does «F2« on the display of my Hisense I8433C mean and what should I do?
The appearance of «F2« on the display of your Hisense Hob indicates that the cooking zone has overheated. Allow the cooking zone to cool down.
What to do if my Hisense I8433C Hob is beeping continuously and the display is flashing?
If your Hisense Hob is beeping and the display is flashing, it could be due to water spillage on the sensor surface or an object placed over the sensors. To resolve this, wipe the sensor surface.
Why is my Hisense I8433C Hob fan still running after it's switched off?
The fan in your Hisense Hob may continue to run even after it has been switched off. This is because the induction electronic components require temperature control, and the fan operates if the temperature remains too high.
Why does my Hisense Hob make a transformer-like buzzing sound?
A transformer-like buzzing sound from your Hisense Hob typically occurs when cooking at a high power level. This noise should disappear or weaken when you reduce the power level.
Why is my cookware vibrating and crackling on my Hisense I8433C?
The vibration and crackling of cookware on your Hisense Hob can occur with pots or pans made of different materials. This results from vibrations along the adjacent surfaces of different material layers.
To Next Page
General
