The glass is
being
scratched.
Rough-edged cookware.
Unsuitable, abrasive scourer or
cleaning products being used.
Use cookware with flat and smooth
bases. See ‘Choosing the right
cookware’.
See ‘Care and cleaning’.
Some pans make This may be caused by the This is normal for cookware and
crackling or clicking
noises.
construction of your cookware
(layers of different metals
does not indicate a fault.
vibrating differently).
Cooking Hob HHU60CEEC
Cooking Zones 4 Zones
Supply Voltage 220-240V~/380-415V 2N~
Installed Electric Power 6000W
Product Size L×W×H(mm) 590X520X55
Building-in Dimensions A×B (mm) 560X490
TECHNICAL SPECIFICATION
Weight and Dimensions are approximate. Because we continually strive to
improve our products we may change specifications and designs without prior
notice.
INSTALLATION
Selection of installation equipment
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 50mm space shall be preserved
around the hole.
Be sure the thickness of the work surface is at least 30mm. Please select heat-resistant
work surface material to avoid larger deformation caused by the heat radiation from the
hotplate. As shown below:
14
To Next Page
Loading...
Need help?
General
