Hisense HV672C60UK User Manual

Before washing for the first time
Water hardness
In order to achieve good dishwashing results, the dishwasher needs soft water (water with low mineral
content). Hard water leaves a white coating on dishes and the dishwasher.
Checking water hardness
Water hardness is specified using the German water hardness scale (°dH) or the French water hardness
scale (°fH).
A water supply with a water hardness in excess of 6°dH (9°fH) must be softened. This is done
automatically with the aid of the built-in water softener. In order for the water softener to function
optimally, it must be adjusted to the hardness of the water supply. Once you have adjusted the water
softener, use detergent and rinse aid doses suitable for soft water.
Contact the local waterworks to check the water hardness in your area.
Make a note of the water hardness:____________
If the water hardness exceeds 50°dH (89°fH), we recommend connecting an external water softener.
Increased consumption during regeneration
The dishwasher's built-in water softener is regularly regenerated to maintain its function. Regeneration
extends the dishwashing program and increases energy and water consumption. Just how often the
dishwasher's water softener is regenerated depends on the selected setting.
Example: If the Ecoprogram is run with a water hardness of 14 °dH (25 °fH), the water softener is
regenerated at regular intervals (after 6 dishwashing cycles), energy consumption increases by 0.015
kWh and water consumption increases by 2.3 litres while the program time is extended by 3 minutes.
Regeneration occurs during the program's main wash.
WARNING!
Hard water leaves a white coating on dishes and inside the dishwasher. It is therefore important
that you select the right setting for the water softener! See Water hardness in the chapter Settings.
Never run the dishwasher with an empty salt compartment if the water supply has a water
hardness in excess of 6°dH (9°fH).
Set the Water hardness
Chapter Settings describes how to adjust the water softener.
Top up with salt
Salt compartment lid
1. Unscrew the salt compartment lid.
7

Hisense HV672C60UK Specifications

General

Door color	Black
Water fill	Cold, Hot
Cord length	1.83 m
Control type	Touch
Display type	LED
Product size	Full size (60 cm)
Tub material	Stainless steel
Custom panel-ready	Yes
Outlet hose length	1.5 m
Appliance placement	Fully built-in
Door panel included	No
Cutlery compartment type	Drawer
Baskets adjustable placement	Upper
Cycle time	205 min
Noise level	39 dB
Drying system	AirDry
Delay start (max)	24 h
Dishwashing programs	60min 60°C, Auto 45-65 ºC, Crystal 45 °C, Intensive 70 ºC
Number of spray zones	2
Number of place settings	16 place settings
Number of washing programs	5
Current	10 A
Connected load	1900 W
AC input voltage	220-240 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Power consumption (left-on)	0.49 W
Water consumption per cycle	9.6 L
Energy consumption per cycle	0.78 kWh
Package depth	665 mm
Package width	640 mm
Package weight	35300 g
Country of origin	Slovenia

Weight and Dimensions

Depth	556 mm
Width	596 mm
Height	890 mm
Weight	33000 g
Installation compartment depth	570 mm
Installation compartment width	600 mm
Installation compartment height	820 mm
Installation compartment height (max)	893 mm