EasyManuals Logo

Hisense HV672C60UK User Manual

Hisense HV672C60UK
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Greener dishwashing
The dishwasher saves energy and water
When using a dishwasher in a residential setting, less energy and water are generally used compared
to washing the dishes by hand.
Do not rinse under running water
Do not rinse the dishes under running water as this will lead to increased energy and water consumption.
Simply scrape off large food particles before loading the dishwasher.
Choose a green detergent
Read the environmental declaration on the packaging!
Too much detergent, rinse aid and salt can result in less effective dishwashing and also entail greater
environmental impact.
Run a fully loaded dishwasher
Save energy and water by waiting until the dishwasher is full before running a program (see number
of standard place settings).
Run programs at a lower temperature
If the dishes are only slightly dirty, you can select a program with a low temperature.
Select dishwashing program Eco
This program is suitable for washing normally dirty dishes and is the most effective program in terms
of combined energy and water consumption. This program is used to assess compliance with EU
legislation on ecodesign.
The dishwashing program is designed for an effective wash using as little energy and water as possible.
The program washes at a low temperature for a long time.
Select option Auto open
Better drying results are achieved if you use the Auto open option, which automatically opens the
dishwasher door. Wait until the dishwasher indicates that the program has ended and the dishes have
cooled before unloading the dishwasher. (If the dishwasher is built-in the surrounding furnishings must
be resistant to any condensation from the dishwasher.)
Connect to cold water
Connect the dishwasher to the cold water supply if the building is heated using oil, electricity or gas.
Connection to hot water supply
Connect the dishwasher to the hot water supply (max. 70 °C) if the building is heated using an
energy-efficient means such as district heating, solar power or geothermal power. Choosing a hot
water connection cuts dishwashing times and reduces the dishwasher's energy consumption.
NOTE!
Do not exceed the permitted water supply temperature. Certain materials used in some cookware
cannot withstand strong heat.
9

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hisense HV672C60UK and is the answer not in the manual?

Hisense HV672C60UK Specifications

General IconGeneral
Door colorBlack
Water fillCold, Hot
Cord length1.83 m
Control typeTouch
Display typeLED
Product sizeFull size (60 cm)
Tub materialStainless steel
Custom panel-readyYes
Outlet hose length1.5 m
Appliance placementFully built-in
Door panel includedNo
Cutlery compartment typeDrawer
Baskets adjustable placementUpper
Cycle time205 min
Noise level39 dB
Drying systemAirDry
Delay start (max)24 h
Dishwashing programs60min 60°C, Auto 45-65 ºC, Crystal 45 °C, Intensive 70 ºC
Number of spray zones2
Number of place settings16 place settings
Number of washing programs5
Current10 A
Connected load1900 W
AC input voltage220-240 V
AC input frequency50 Hz
Energy efficiency scaleA to G
Power consumption (left-on)0.49 W
Water consumption per cycle9.6 L
Energy consumption per cycle0.78 kWh
Package depth665 mm
Package width640 mm
Package weight35300 g
Country of originSlovenia
Weight and Dimensions IconWeight and Dimensions
Depth556 mm
Width596 mm
Height890 mm
Weight33000 g
Installation compartment depth570 mm
Installation compartment width600 mm
Installation compartment height820 mm
Installation compartment height (max)893 mm

Related product manuals