18
785072
TIMER FUNCTIONS
This function allows setting the cooking time for the selected cooking zone on which a
power level has already been set. When the time expires, the cooking zone is switched off
automatically.
Cooking time can be set from 1 to 99 minutes. The program timer can be set for all
cooking zones at all power levels.
TIMER ACTIVATION
First, select the cooking zone (E). Then, use the (C) and (D) keys to set the power level.
The program timer will not operate if the power level is set to "0". Touch the cooking zone
selection key (E) again. An acoustic signal will be emitted, and "t." with a decimal point will
appear on the cooking zone display unit (G). Remaining time will appear on the opposite
cooking zone display.
- Touch the (C) and (D) keys to set the time from 1 to 99 minutes.
- When the desired value is set, the countdown begins. If you touch the (C) and (D) keys
simultaneously, the time will be reset to »0« or it will be switched o . If you touch and
hold the (C) or (D) key, the rate at which the setting changes will increase.
- After a few seconds, timer display will switch o and a decimal point will be lit next to
the power display.
- After the set time has expired, acoustic signal will be activated and the cooking zone will
be switched o . Switch of the alarm by touching any key; alternatively, it will switch o
automatically after 2 minutes.
Changing the cooking time
- Remaining cooking time can be changed at any time during cooking.
- Press the key for the desired cooking zone twice.
- Touch the (C) or (D) key to set a new desired cooking time.
Displaying the remaining cooking time
If several timer settings are activated, remaining cooking time can be displayed by
touching the (E) key twice.
AEE
G
D
C
To Next Page
Loading...
Need help?
General
Weight and Dimensions
