Hisense I6421C User Manual

CONNECTING THE COOKING
HOB TO THE POWER MAINS
- Power mains protection must conform to the relevant regulations.
- Before connecting the appliance, make sure the voltage indicated on the rating plate
conforms to the voltage in your power mains.
- There should be a switching device in the electrical installation that can disconnect
all poles of the appliance form the power mains, with a minimum clearance of 3 mm
between the contacts when open. Suitable devices include fuses, protective switches
etc.
- The connection should be adjusted to the current and fuses.
- After installation, the parts carrying electrical current and insulated parts shall be
protected against contact.
The appliance may only be connected by an authorised expert.
False connection can destroy parts of the appliance. In such case,
there is no right to warranty.
Disconnect the appliance from the power mains before any repair
or maintenance operation.
33
785072

Hisense I6421C Specifications

General

Hob type	Zone induction hob
Hob cover	No
Frame type	Frameless
Product color	Black
Hob width size	60 cm
Top surface type	-
Appliance placement	Built-in
Number of gas cooking zones	0 zone(s)
Number of electric cooking zones	4 zone(s)
Control type	Touch
Easy to clean	Yes
Control position	Front
Number of boosters	4
Connected load (gas)	- W
Connected load (electric)	7200 W
Package depth	640 mm
Package width	715 mm
Package height	110 mm
Package weight	8100 g

Weight and Dimensions

Depth	520 mm
Width	595 mm
Height	58 mm
Weight	7600 g