Hisense I6421C User Manual

32
-
The worktop has to be completely level.
- Protect the cut out surfaces.
FITTING THE FOAM GASKET
Some appliances come with the gasket already fitted!
Before installing the appliance into a kitchen worktop, attach the foam gasket supplied
with the appliance to the bottom side of the glass ceramic hob.
- Remove the protective fi lm from the gasket.
- Attach the gasket to the bottom side of the glass (2–3 mm away from the edge). The
gasket has to be applied along the entire edge of the glass. The gasket may not overlap
in the corners.
- When fi tting the gasket, make sure it is not damaged by or in contact with any sharp
objects.
Do not install the appliance without this gasket!
785072

Hisense I6421C Specifications

General

Hob type	Zone induction hob
Hob cover	No
Frame type	Frameless
Product color	Black
Hob width size	60 cm
Top surface type	-
Appliance placement	Built-in
Number of gas cooking zones	0 zone(s)
Number of electric cooking zones	4 zone(s)
Control type	Touch
Easy to clean	Yes
Control position	Front
Number of boosters	4
Connected load (gas)	- W
Connected load (electric)	7200 W
Package depth	640 mm
Package width	715 mm
Package height	110 mm
Package weight	8100 g

Weight and Dimensions

Depth	520 mm
Width	595 mm
Height	58 mm
Weight	7600 g