Hisense I6421C User Manual

26
AIR VENTS IN THE LOWER KITCHEN CABINET
- Normal operation of the induction cooking hob electronic components requires
su cient air circulation.
A Lower cabinet with a drawer
- There must be an opening with a height of no less than 140 mm along the entire width
of the cabinet in the cabinet rear wall. In addition, there should be an opening of at least
6 mm in the front side, along the entire width of the cupboard.
- The hob is fi tted with a fan located in its lower part. If there is a drawer below the
kitchen cabinet, do not use it to store small objects or paper as these could, if sucked
into the fan, damage the fan and the cooling system. Moreover, do not use the drawer
to store aluminium foil or fl ammable substances or liquids (such as sprays). Keep such
substances away from the cooking hob. Danger of explosion! There should be at least
20 mm of clearance between the contents of the drawer and the fan inlet vents.
785072

Hisense I6421C Specifications

General

Hob type	Zone induction hob
Hob cover	No
Frame type	Frameless
Product color	Black
Hob width size	60 cm
Top surface type	-
Appliance placement	Built-in
Number of gas cooking zones	0 zone(s)
Number of electric cooking zones	4 zone(s)
Control type	Touch
Easy to clean	Yes
Control position	Front
Number of boosters	4
Connected load (gas)	- W
Connected load (electric)	7200 W
Package depth	640 mm
Package width	715 mm
Package height	110 mm
Package weight	8100 g

Weight and Dimensions

Depth	520 mm
Width	595 mm
Height	58 mm
Weight	7600 g