- Use of solid wood corner trims on worktops behind the cooking zone is only allowed if
the clearance between the trim and the cooking hob is no smaller than indicated on the
installation plans.
- If the thickness of your counter top exceeds 35-50 mm, then the opening for the hob
should be made in the middle of the oven, with suffi cient clearance from the front edge
of the counter top so that the induction hob does not touch the oven shield.
INSTALLING A BUILT-IN HOB
40
33
785435
30cm
50
300
520
54
490-492
283-285
min 20
min 600
min 40
min 50
To Next Page
Loading...
Need help?
General
