Hisense MSD6586 - Common Error; Reading Device ID Have Different ID Codes.

- 41 -
4.2.9 Common error
1、 Reading Device ID have different ID codes.
 Check the SecureCRT window whether close.
2、When input key, appear” Input format Error”
 Check Mstv_tool --open debugport -- “3rd generation” whether selected .
3、ISP_Tool connected failure
 Close the SecureCRT, check whether “ ” in front of “UseSWI2C” of “Config” .
4、If ISP_Tool connected appear error “ Device not selected,yet”;
 Reduce the I2C speed setting figure lower “Roughly speed” about “200KHz” and have a try.
5、After USB upgrade, appear “
mtdoops: mtd device (mtddev=name/number) must be supplied，Kernel
panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,4)”
Reason: After burn mboot and before USB upgrade, forget to clear the
zone schema.
 Don’t burn mboot again，ONLY restart TV with “cu” demand to USB upgrading again
in mboot .