Why is there no picture on my Hisense PX1-PRO, or is it black and white?
If your Hisense Projector displays no picture or shows a black and white picture, try the following: * Unplug the projector's power cord from the AC outlet and plug it back in after 60 seconds. * Ensure that the Color Saturation is set to 50 or higher in the settings. * Try tuning to different TV channels to rule out a channel-specific issue.
What to do if my Hisense Projector picture is distorted or appears wavy?
If the picture on your Hisense Projector is distorted or wavy, it could be due to interference from other electrical appliances. Try turning off nearby appliances; if the interference stops, move the appliance further away from the projector. Also, try plugging the projector into a different power outlet to rule out power-related issues.
What to do if my Hisense Projector picture is blurry or flickering, or cuts out momentarily?
If your Hisense Projector's picture is blurry, flickering, or cuts out momentarily, try these steps: * Adjust the sharpness via Settings > Picture > Sharpness; increasing or decreasing it may improve the image. * If you're using an external antenna, check its direction, position, and connections. * Adjust the antenna's direction, or reset or fine-tune the channel.
Why is the picture distorted on my Hisense PX1-PRO?
Picture distortion on your Hisense Projector can occur due to several reasons: * Video content compression, especially during fast-moving scenes in sports or action movies, can cause distortions. * Weak signal reception can also result in screen distortion, which isn't a malfunction. * Mobile phones used close to the projector (within 1 meter) may cause noise on analog and digital channels.
How to fix red, purple, or pink colors on Hisense PX1-PRO Projector screen?
If the picture on your Hisense Projector appears red, purple, pink, or other unusual colors, try adjusting the white balance settings. Go to Settings > Picture > Calibration Settings > White Balance and try increasing or decreasing the white balance to correct the color issue.
Why is there no sound on my Hisense PX1-PRO, or the sound is too low at maximum volume?
If there is no sound or the sound is too low even at maximum volume on your Hisense Projector, check the volume control of the device connected to your projector (such as a cable or satellite box, DVD player, or Blu-ray player).
Why is there no sound on my Hisense Projector but the picture is normal?
If your Hisense Projector has a normal picture but no sound, ensure that the volume settings are properly adjusted and check if 'Mute' mode is enabled. If it is, turn it off.
Why are the speakers making an odd sound on my Hisense Projector?
If the speakers on your Hisense Projector are making odd sounds: * Ensure that the audio cable is connected to the correct audio output connector on the external device. * For antenna or cable connections, check the signal information; a low signal level may cause sound distortions.
General| Color gamut | 107 % |
|---|---|
| Number of colors | 1.07 billion colors |
| Native aspect ratio | 16:9 |
| Projection technology | DLP |
| Screen size compatibility | 90 - 130 \ |
| Projector native resolution | 2160p (3840x2160) |
| 3D | No |
| Full HD | Yes |
| Video color modes | Vivid |
| Supported graphics resolutions | 3840 x 2160 |
| Processor cores | 4 |
| Video apps | YouTube |
| Noise level | - dB |
| Operating system installed | Android |
| High Dynamic Range (HDR) technology | Filmmaker Mode, High Dynamic Range 10 (HDR10), Hybrid Log-Gamma (HLG) |
| Audio decoders | Dolby Atmos |
| RMS rated power | 30 W |
| Audio formats supported | AAC, AC3, AC4, ASF, EAC3, FLAC, MP3, MP4, PCM, WAV, WMA |
| Image formats supported | BMP, GIF, JPG, PNG |
| Video formats supported | AVC, H.264, HEVC, HEVC/H.265, MKV, MOV, MP4, TS, VP9 |
| Number of built-in speakers | 2 |
| Wi-Fi standards | Wi-Fi 5 (802.11ac) |
| Ethernet LAN (RJ-45) ports | 1 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Component video (YPbPr/YCbCr) in | 0 |
| Power source | AC |
| AC input voltage | 120 - 240 V |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 350 W |
| Frame rate | 60 Hz |
| Sustainability certificates | RoHS |
| Product type | Ultra short throw projector |
| Product color | Black |
| Market positioning | Home cinema |
| Cable lock slot type | Kensington |
| Remote control type | IR |
| Focus | Auto/Manual |
| Light source type | Laser |
| Service life of light source | 25000 h |
| Quantity per pack | 1 pc(s) |
Weight and Dimensions| Depth | 158 mm |
|---|---|
| Width | 547 mm |
| Height | 346 mm |
| Weight | 11500 g |
| Package depth | 316 mm |
| Package width | 711 mm |
| Package height | 507 mm |
| Package weight | 15000 g |
Guide to scanning channels automatically or manually.
How to display the list of available TV channels.
How to view and manage your favorite TV channels.
Guide to connecting your TV to the internet via Ethernet.
Steps to connect your TV to a Wi-Fi network.
How to pair and use Bluetooth devices with your TV.
How to use HDMI&CEC for controlling external devices.
Connect audio systems using HDMI ARC/eARC for enhanced sound.
How to connect USB storage devices and cameras to your TV.
Mirror your mobile device's screen content onto the TV.
Share media files from your mobile/PC to the TV screen.
Navigating and customizing the TV's Home screen.
How to use voice commands for TV control and information.
Guide to setting up and using Amazon Alexa for TV control.
Accessing and playing media files like photos, music, and videos.
Managing applications on your TV, including installing and removing.
Setting up a mobile app for remote TV control.
Fine-tune picture settings like luminance, mode, contrast, color.
Adjust aspect ratio and zoom settings for the picture.
Detailed picture adjustments like Overscan, Color Temp, Motion.
Adjust color space, gamma, and white balance for calibration.
Optimize TV settings for an enhanced gaming experience.
Configure sound modes, speakers, bass, surround, clarity, volume.
Connect audio devices via HDMI eARC for premium sound.
Improve the clarity of dialogue in audio playback.
Enhance sound richness for an immersive audio experience.
Fine-tune audio settings like Balance, Volume, and Digital Audio Out.
Reset sound settings to factory defaults.
Features for visual/hearing impairment, captions, text-to-speech.
Block inappropriate content with PIN, channel, input, and program locks.
Set date, time, language, and keyboard preferences.
Manage storage, home screen, security, reset, and device information.
Configure system updates, timers, setup assistant, and screenless mode.
Manage diagnostics, control ports, power settings, and product registration.
Remote control, E-Manual, mobile app, cache clearing, help, and projection/screen settings.
Auto/manual geometric correction, focus adjustment, and eye protection.
Solutions for common problems related to the TV picture.
Solutions for common problems related to the TV sound.
Troubleshooting for internet and network connectivity problems.
Resolving issues when connecting external devices to the TV.
Troubleshooting steps for issues with TV applications.
Solutions for problems when playing media files.
Troubleshooting for voice control features like Alexa and Google Assistant.
Solutions for problems with Google Assistant functionality.
Common issues and resolutions, including TV heat and clicking sounds.
How to access and browse the electronic user manual.
How to use search and setting functions within the E-Manual.
To Next Page
