28
After-Sales Service(see “After-Sales Service” ).
The drain hose is frozen up.
fig.2
Electronic module fails(F05, F04,F23,F07,F06). (fig.3,fig.4,fig.5,fig.6,fig.7)
Electronic module fails.
Turn the programme selector knob on position "OFF" for 3 seconds to turn off the
machine and select the desired programme; if the fault persists,unplug the appliance
and contact After-Sales Service (see “After-Sales Service”).
fig.3 Abnormal temperature sensor
fig.4 Abnormal water heater
fig.5 Abnormal water level
sensor
fig.
6
motor error
fig.7 motor speed error
Plug in the appliance again. If the fault persists, unplug the appliance and contact