Wash
program
Wash
time(min)
Spin
time(min)
Fuzzy
Quick
Delicate
Jeans
Heavy
Wool
Memory
Eco
9.
The default time of rinses is as follows: When the quick program
is selected, the default time of rinse is 1; when the programs of
fuzzy, delicate, jeans, heavy or wool are selected, the time is 2;
and when the eco is selected, the time is 2. If only rinse program
is set by the user, the time of rinse cannot be set to 0.
10. Rinse
Wash
The washing time can be adjusted according to the needs of the
user.
When the “Wash” button is pressed for a long time, the figure on
the digital tube is incremented continuously until the button is
released.
The washing time for quick program is no more than 8 minutes.
The washing time for wool program is no more than 16 minutes.
After powering on the machine or selecting the program, press
the “Wash” button to select the single wash program. At this
time, the digital tube displays the currently required washing
time; press the “Wash” button again to increment the washing
time in cycle, and the washing time cannot be set to 0. After
selecting the single washing program, press the “Rinse” button to
add the rinsing process, and press the “Spin” button to add the
spin process.
11. Spin
The spin time can be selected.
The single spin can be set. After powering on the machine or
selecting the program, press the “Spin” button to select the
single spin program. Meanwhile, the spin time cannot be set to 0.
Under the child lock state, if the cover is opened, the “E1” alarm
will be issued, then if the cover is not covered within 5 seconds,
the washing machine will automatically drain, and stop the
drainage after the alarm is removed.
After the power is turned off, the child lock is invalid.
15
7
13
14
16
11
5
15
11
16
To Next Page
Loading...
Need help?
General
