Hitachi 32PD3000E - Wiring for Audio; Video Components

32PD3000 / 42PD3000
59
Wiring for Audio / Video Components
Specification
1. This Drawing shows the wire dressing and connectors' connection of
AVC3-E Final Assy.
2. Connectors with wire should be inserted into Plug Pin Posts as
shown on the table below
Connector with wire Plug Pin 1 Plug Pin 2
Name Assy List Board Name Board Name
ESC FINAL ASSY Control Board PSC AV Board PL702
EFP1 FINAL ASSY Power Board PFP1 HCP111 P002P
EFP2 FINAL ASSY Power Board PFP2 HCP111 P003P
ESF FINAL ASSY AV Board PSF HCP111 P001
PSP Power Board Assy AV Board PSP - -
3. Into Plug Pin Post with Lock function, connector housing should be
inserted deeply until it can be locked.
4. Into Plug Pin Post without Lock function, connector housing should be
inserted most deeply.
5. Flexible Flat Cable ESF should be fixed as shown on the drawing below
150
10 10
position and lock
EFP1, EFP2, ESC and
EARTH should never be
bunched together with ZSC
(Nittoh adhesive tape No.188
L=50mm)
Lead clamper for EFP1, EFP2,
ESC and EARTH should be locked
after fixing EARTH and looped
EFP1, EFP2 and ESC wires.