Hitachi 40K31 - How to Attach the Stand; How to Remove the Stand

7 EN
How to attach the stand
NOTE:
• AssuretheACcordisnotconnectedtoanACoutlet.
• Beforebeginningthisprocess,makesurethatyouhaveaclean,safe,andcushionedspacetoworkattoavoidanydamagetothe
unit.
• DonottouchorpresstheLEDscreen,theglassmightbreakunderpressure.
 CarefullyplacetheTVscreenface-downonaclean,cushionedsurface.

 



L
R

How to remove the stand
Whenyoutransportthisproduct,removethestandandpackitatagainstthebackoftheunitinthecarton.Toremovethestand,
performtheabovestepsinreverseorder.
WhenyoumounttheTVonthewall,removebothstands(RandL). TodisconnectthestandremovethescrewsfromthebottomofTV.