Hitachi 8000 Series - Connectivity and Ports; Wired Remote Control Port; Remote Control Relay Functionality

17
Operating
Wired remote control port
• To use a wired remote control, connect a wired remote control to the
REMOTE CONROL IN port. You can also connect another projector to the
REMOTE CONROL OUT port to control it from the wired remote control. You
can utilize this projector as a remote control-relay with the REMOTE CONROL
IN and OUT ports. To connect the wired remote control or another projector
to the REMOTE CONTROL IN or OUT ports, use audio cables with 3.5 mm
diameter stereo mini plugs. This function is useful when a wireless remote
signal may not reliably reach the projector.
NOTE
Speakers
(with an amplier)
(Wired)
Remote
control
Monitor
Another
projector
(
58)
Remote control