Hitachi C 10FCH2

OPTIONAL ACCESSORIES
ITEM
NO.
CODE NO.
DESCRIPTION REMARKS
NO.
USED
*
ALTERNATIVE PARTS --- 7 ---10 -- 06
STANDARD ACCESSORIES
ITEM
NO.
CODE NO.
DESCRIPTION REMARKS
NO.
USED
C 10FCH2
501 944-458 HEX. BAR WRENCH 4MM 1
502 940-543 BOX WRENCH 10MM 1
503 949-695 BOLT M10X35 (10 PCS.) 1
* 504 974-663Z COLLAR (A) FOR D30 HOLE 1 FOR AUS
505 322-955 DUST BAG (BLACK) 1
601 322-957 VISE (B) ASS’Y 1 INCLUD. 602-608
602 998-836 KNOB BOLT M6X11 1
603 SCREW HOLDER (B) 1
604 306-985 WASHER (H) 1
605 964-851 BASE RUBBER 1
606 304-043
MACHINE SCREW (W/WASHERS) M4X10 (BLACK) 1
607 318-967 VISE SHAFT 1
608 321-551 KNOB BOLT M10X54 1
609 322-713 CROWN MOLDING STOPPER (L) ASS’Y 1 INCLUD. 610-613
610 301-806 WING BOLT M6X15 1
611 CROWN MOLDING STOPPER (L) 1
612 321-390 CROWN MOLDING STOPPER HOLDER 1
613 316-030 WING BOLT M6X52 1
614 322-714 CROWN MOLDING STOPPER (R) ASS’Y 1 INCLUD. 615-618
615 316-030 WING BOLT M6X52 2
616 321-390 CROWN MOLDING STOPPER HOLDER 1
617 CROWN MOLDING STOPPER (R) 1
618 301-806 WING BOLT M6X15 1
619 322-956 HOLDER ASS’Y 1 INCLUD. 620-625
620 321-549 HOLDER 1
621 949-313 WING NUT M6 (10 PCS.) 1
622 949-556 NUT M6 (10 PCS.) 1
623 322-047 VISE PLATE 1
624 949-425 WASHER M6 (10 PCS.) 1
625 323-134 HIGH TENSION BOLT M6X80 1
626 974-561 STOPPER 1
627 949-404 WING BOLT M6X20 (10 PCS.) 1
628 322-712 CROWN MOLDING VISE ASS’Y 1 INCLUD. 601, 609
629 322-710 GUIDE ASS’Y 1 INCLUD. 615, 619, 626, 627
* 630 976-472
TCT SAW BLADE CROSS-CUT 255MM-D15.9 HOLE 1 FOR USA, CAN
* 631 319-658
TCT SAW BLADE 255MM-D15.88 HOLE-NT100 1 FOR USA, CAN