Hitachi CP-A220N - Connection Error

32
When the connection to the projector could not
be established, an error message, “Network
Connection not established”, will come up.
Click
the [OK] then the “LiveViewer” main
menu is displayed even though the network
is not established. Click
on the main menu
to go back to item 1.5 Selecting the network
connection method. (
14)
1.8.2 Connection error
1.8 Conrming the connection to your destination (continued)
• Check the network setting in the projector, and retry the connection
from item 1.3.2 Starting the “LiveViewer”. (9)
NOTE
1. Connection to the network