56
3.7 Schedule Settings (Continued)
The schedule settings are shown below.
Item Description
Schedule Click the [Enable] check box to enable the schedule.
Date (Month/Day)
Congures the month and date.
This item appears only when Specic date (No. 1-5) is
selected.
Click the [Apply] button to save the settings.
The current event settings are displayed on the schedule list. To add additional
functions and events, set the following items.
Item Description
Time Congures the time to execute commands.
Command
[Parameter]
Congures the commands to be executed.
Power Congures the parameters for power control.
Input Source Congures the parameters for input switching.
My Image
Congures the parameters for My Image data display. (
70)
Messenger Congures the parameters for Messenger data display. (
72
)
Slideshow Congures the Start/Stop parameters for the Slideshow.
Click the [Register] button to add new commands to the schedule list.
Click the [Delete] button to delete commands from the schedule list.
Click the [Reset] button to delete all commands and reset the schedule settings
from the schedule list.
3. Web Control
To Next Page
Loading...
Need help?
General
Weight and Dimensions
