EasyManuals Logo

Hitachi CP-A220N User Manual

Hitachi CP-A220N
261 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #199 background imageLoading...
Page #199 background image
85
7.4 Command Control via the Network (Continued)
When the authentication setting is enabled, the following settings are required.
(
60)
7) Click the [Security Settings] on the main menu.
8) Click the [Network Control] and enter the desired authentication password.
* See NOTE.
9) Click the [Apply] button to save the settings.
NOTE
7. Other Functions
• The Authentication Password will be the same for Network Control
Port1 (Port: 23), Network Control Port2 (Port: 9715), PJLink™ Port (Port:
4352), My Image Port (Port: 9716) and Messenger Port (Port: 9719).
• The new conguration settings are activated after restarting the network
connection. When the conguration settings are changed, you must restart the
network connection. You can restart the network connection by clicking the
[Network Restart] on the main menu.

Table of Contents

Other manuals for Hitachi CP-A220N

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hitachi CP-A220N and is the answer not in the manual?

Hitachi CP-A220N Specifications

General IconGeneral
Matrix size0.63 \
Matrix type3-panel (p-Si TFT active)
Number of colors16.78 million colors
Native aspect ratio4:3
Projection distance- m
Projection technology3LCD
Contrast ratio (typical)2000:1
Digital gamma correctionYes
Screen size compatibility- \
Projector native resolutionXGA (1024x768)
Vertical synchronization (max)120 kHz
Vertical synchronization (min)50 kHz
Horizontal synchronization (max)106 kHz
Horizontal synchronization (min)15 kHz
Throw ratio0.3:1
Focal length range- mm
Lamp power210 W
Light source typeLamp
Service life of light source3000 h
Service life of light source (economic mode)5000 h
Full HDNo
Supported video modes1080i, 1080p, 480i, 480p, 576i, 720p
Analog signal format systemNTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM
Supported graphics resolutions1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 768 (WXGA), 1280 x 800 (WXGA), 1360 x 768 (WXGA), 1400 x 1050 (SXGA+), 1440 x 900 (WXGA+), 1600 x 1200 (UXGA), 640 x 480 (VGA), 800 x 600 (SVGA)
RMS rated power10 W
Number of built-in speakers1
USB connector typeUSB Type-A, USB Type-B
Serial interface typeRS-232
USB 2.0 ports quantity2
VGA (D-Sub) ports quantity3
Component video (YPbPr/YCbCr) in0
Optical disc player typeNot included
Noise level35 dB
CertificationUL, C-UL, FCC, CE
Noise level (economic mode)28 dB
Product colorWhite
Cable lock slot typeKensington
Power sourceAC
AC input voltage90 - 264 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.3 W
Power consumption (typical)310 W
Operating temperature (T-T)5 - 35 °C
Weight and Dimensions IconWeight and Dimensions
Depth303 mm
Width344.93 mm
Height85.09 mm
Weight3900 g

Related product manuals