113
Troubleshooting
Phenomenon Cases not involving a machine defect
Reference
page
9LGHRVFUHHQ
GLVSOD\IUHH]HV
The FREEZE function is working.
3UHVVFREEZEEXWWRQWRUHVWRUHWKHVFUHHQWRQRUPDO
30
&RORUVKDYHD
IDGHGRXW
DSSHDUDQFHRU
&RORUWRQHLV
SRRU
Color settings are not correctly adjusted.
3HUIRUPSLFWXUHDGMXVWPHQWVE\FKDQJLQJWKH&2/257(03&2/25
7,17DQGRU&2/2563$&(VHWWLQJVXVLQJWKHPHQXIXQFWLRQV
COLOR SPACE setting is not suitable.
&KDQJHWKH&2/2563$&(VHWWLQJWR$8725*%
6037(5(&RU5(&
43
3LFWXUHVDSSHDU
GDUN
The brightness and/or contrast are adjusted to an
H[WUHPHO\ORZOHYHO
$GMXVW%5,*+71(66DQGRU&2175$67VHWWLQJVWRD
KLJKHUOHYHOXVLQJWKHPHQXIXQFWLRQ
36
The projector is operating in Eco mode.
6HW(&202'(WR2))DQGVHW$872(&202'(WR2))
LQWKH6(783PHQX
50
The lamp is approaching the end of its product lifetime.
5HSODFHWKHODPS
When the internal temperature is high (even if the
ambient temperature is lower than 35°C), the brightness
of lamp might be reduced automatically.
3OHDVHFOHDQRUUHSODFHWKHDLU¿OWHU
100
3LFWXUHVDSSHDU
EOXUU\
Either the focus and/or horizontal phase settings are
not properly adjusted.
$GMXVWWKHIRFXVXVLQJWKHFOCUSEXWWRQDQGRU+3+$6(
XVLQJWKHPHQXIXQFWLRQ
The projection window is dirty or misty.
&OHDQWKHSURMHFWLRQZLQGRZUHIHUULQJWRWKHVHFWLRQ³&DULQJ
IRUWKHSURMHFWLRQZLQGRZ´
102
6RPHNLQG
RILPDJH
GHJUDGDWLRQ
VXFKDV
ÀLFNHULQJRU
VWULSHVDSSHDU
RQVFUHHQ
:KHQWKHSURMHFWRULVRSHUDWLQJLQ(FRPRGHÀLFNHULQJ
may appear on screen.
6HW(&202'(WR2))DQGVHW$872(&202'(WR2))
LQWKH6(783PHQX
50
The OVER SCAN ratio is too big.
$GMXVW29(56&$1LQWKH,0$*(PHQXVPDOOHU
40
([FHVVLYH9,'(215
&KDQJHWKHVHWWLQJRI9,'(215LQWKH,1387PHQX
43
The FRAME LOCK function cannot work on the current
input signal.
6HW)5$0(/2&.LQWKH,1387PHQXWR2))
45
Phenomena that may be easy to be mistaken for machine defects (continued)
FRQWLQXHGRQQH[WSDJH
To Next Page
Loading...
Need help?
General
Weight and Dimensions
