EasyManuals Logo

Hitachi CP-WU8461 User Manual

Hitachi CP-WU8461
71 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
24
Item Description
SNMP Port Congures the SNMP port.
Port open Click the [Enable] check box to use SNMP.
Trap address
Congures the destination of the SNMP Trap in IP format.
• The address allows not only IP address but also domain
name if the valid DNS server is setup in the Network
Settings. The maximum length of host or domain name is up
to 255 characters.
Download MIB le Downloads a MIB le from the projector.
Network Bridge Port Congures the Bridge port number.
Port number
Input the port number.
Except for 41794, 9715, 9716, 9719, 9720, 5900, 5500, 4352
between 1024 and 65535 can be set up. It is set to 9717 as
the default setting.
Click the [Apply] button to save the settings.
3.1 Projector Web Control - Port Settings (continued)
The new conguration settings are activated after restarting the
network connection. When the conguration settings are changed, you must
restart the network connection. You can restart the network connection from
Network Restart on the main menu. (
42)
NOTE
3. Web Control

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hitachi CP-WU8461 and is the answer not in the manual?

Hitachi CP-WU8461 Specifications

General IconGeneral
BrandHitachi
ModelCP-WU8461
CategoryProjector
LanguageEnglish

Related product manuals