10
3. Management with Web browser software
3.1 Confi guring and Controlling the Projector via a Web Browser
You can change the settings of or control the projector via a network by using a
web browser from a PC that is connected to the same network.
(
11 )
3.2 E-mail Alerts
The projector can automatically send an alert to specifi ed e-mail addresses when
the projector requires maintenance or has encountered an error.
(
33 )
3.3 Projector Management using SNMP
This projector is SNMP (Simple Network Management Protocol) compliant,
allowing you to monitor it from a remote location using SNMP software. In
addition, the projector is able to send failure & warning alerts to a specifi ed PC.
(
35 )
3.4 Event Scheduling
You can schedule the projector to perform various functions according to the date
and time.
(
36 )
3.5 MY IMAGE (Still Image Transfer) Display
The projector can display still images that are transferred via the network.
(
39 )
3.6 Command Control via the Network
The projector can be controlled using RS-232C commands over a network.
(
3. Management with Web browser software
3. Management with Web browser software
This projector is equipped with the following network functions by using a web
browser software.
3.7 Controlling the external devise via the projector (using the
NETWORK BRIDGE function)
Using the NETWORK BRIDGE function can control an external devise as a
network terminal, via this projector from the computer. (
46 )
3.8 Batch-controlling multiple projectors (using the DAISY CHAIN
function)
Using the DAISY CHAIN function can simultaneously control multiple projectors
connected to a shared RS-232C bus, from the computer. (
To Next Page
Loading...
