15
3. Management with Web browser software
3.1 Confi guring and controlling the projector via a web browser (continued)
3.1.3 Network Settings
Displays and confi gures network settings.
Item Description
IP Confi guration Confi gures network settings.
DHCP ON Enables DHCP.
DHCP OFF Disables DHCP.
IP Address Confi gures the IP address when DHCP is disabled.
Subnet Mask Confi gures the subnet mask when DHCP is disabled.
Default Gateway Confi gures the default gateway when DHCP is disabled.
Projector Name
Confi gures the name of the projector.
The length of the Projector Name can be up to 64
alphanumeric characters. Only alphabets, numbers and
following symbols can be used. !"#$%&'()*+,-./:;<=>?@
[\]^_`{|}~ and space
sysLocation (SNMP)
Confi gures the location to be referred to when using SNMP.
The length of the sysLocation can be up to 255 alphanumeric
characters. Only numbers ‘0-9’ and alphabet ‘a-z’, ‘A-Z’ can
be used.
sysContact (SNMP)
Confi gures the contact information to be referred to when
using SNMP.
The length of the sysContact can be up to 255 alphanumeric
characters. Only numbers ‘0-9’ and alphabet ‘a-z’, ‘A-Z’ can
be used.
DNS Server Address Confi gures the DNS server address.
Click [Apply] button to save the settings.
• The new confi guration settings are activated after restarting the
network connection. When the confi guration settings are changed, you must
restart the network connection. You can restart the network connection by
clicking [Network Restart] on the main menu.
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
NOTE
To Next Page
Loading...
